AT17200-MM: 2-port Commercial Modbus RTU/ASCII to Modbus TCP Gateway

The AT17000 Modbus Gateway enables communication between Modbus RTU and Modbus TCP Ethernet networks in every possible Master / Slave / Scanner / Adapter Application Scenario.

The AT17000 has all the basic Modbus gateway router features that can be complemented with enhanced features in the different AT models, such as: 1 or 2 serial ports, PoE, Analog and Digital I&O (providing ADC inputs, Relay, and Counter) as a Virtual Device, that can be configured and act upon Modbus Commands or ADC / Comparator / Counter thresholds.

The AT17000 has been engineered for application setup simplicity, its intuitive web interface make it the industry’s easiest and fastest Configuration setup tool on the market. You even may say you don’t need to read the manual.

All AT17000 comes with reliable Tech Support and a 5 year warranty

Category

Resources

User Manual

Datasheet

Driver

AT17000-MM: Modbus RTU/ASCII to Modbus TCP Ethernet Gateway Converter Series

AlphaNet AT17000-MM gateways deliver seamless communication between Modbus RTU/ASCII and ModTCP Networks. Alpha-Link converters are engineered to provide reliable protocol extensibility and seamless integration with existing network devices at the most economical price. Plus event monitoring and control by using Digital / Analog inputs and Relays.

AlphaNet 17000-MM: Modbus RTU/ASCII to Modbus TCP Gateway Converter Series

Flexible Industrial gateway offering either 1 or 2 RS ports with PoE, logging memory, 1 A/D input and one relay output, 3 A/D inputs and 2 relay outputs options.

  • Fast processing time as no delays in transmission time of data.
  •  Easy to setup, Browser Based Configuration
  • Accessible by up to 32 TCP master/clients devices, or connect up to 32 TCP slave/server devices.
  • Supports up to 31 or 62 serial slave devices.
  • Ability to Save Configurations for Backup or Loading Multiple Units.
  • Support for All Modbus Function Codes.
  • Handy Save/Load function allows for a completed configuration to be re-used for many other installations
  • Password protection prevents unauthorized access, upload and download of configurations
  • Redundant power supply, multiple possible power sources
  • 1 Ethernet port and 1 or 2 RS-232/422/485 ports
  • Software selectable RS-232/422/485 interface
  • Cost efficient with prices starting at $249 USD to $605 for the most advanced industrial features.

Other Enhances Features

⦁ Commercial or Industrial level Modbus gateway router.

⦁ Power over Ethernet.
⦁ ESD Surge Protection for all inputs and power.
⦁ Redundant power supply, multiple possible power sources.
⦁ +5V Power output, convenient to power optical isolator
⦁ Power Polarity Reverse Protection.
⦁ Analog and digital I/O options.
⦁ ADC, Compatator, Counter on different models.
⦁ Relays, controlled by Modbus or/and by programmed threshold from ADC or Comparator or Counter on different models.
⦁ Fast processing time as no delays in transmission time of data.
⦁ The Industry’s easiest to setup, Browser Based Configuration.
⦁Easy routing set-up reduces manual operations.

Application for 2 Serial Ports AT17200:

The AT17200 Gateway / Router allows all type of possible communication between devices including:

1. Modbus/RTU Master to Modbus/RTU clients on both serial networks by transparent routing. (When second RTU network doesn’t have a master device).

2. Modbus/RTU Master (or both RTU masters, if both Serial networks has Master) to Modbus/ TCP Adapter by transparent routing.

3. Modbus/TCP Scanner to Modbus/RTU slaves in RTU network(s) without master.

4. Exchange data between all master devices on different networks – RTU Masters on different Serial networks and TCP Scanners: The AT17000 presents shared block of Modbus registers where the selected Masters or Scanners can read/write data from.

AlphaLink AT17000 Specifications

Ethernet:

⦁ Number of Ports: 1>
⦁ Speed: 10/100 Mbps, Auto MDI/MDIX
⦁ Connector: 8-pin RJ45
⦁ Magnetic Isolation Protection: 1.5 kV (built-in)

Serial Communication:

⦁ Software-selectable RS-232/422/485 Communication
⦁ Number of Ports: 2 (1 DB-9 and 1 Terminal Block)
⦁ Physical Interfaces: (WEB configurable) Each port supports
⦁ RS-232 (Rx, Tx; Rx, Tx, RTS, CTS);
⦁ RS-422/RS485 Full Duplex (Tx+, Tx-, Rx+, Rx-, GND)
⦁ RS-485 Half Duplex (Data+, Data-, GND).
⦁ Baud Rates: 50…921,600
⦁ Data Bits: 7, 8
⦁ Stop Bits: 1, 2
⦁ Parity: None, Even, Odd

Environmental:

⦁ Operating temperature:
0° to 60° C for Commercial (option AT17xxxCx)
-40° – 80° C for Industrial (option AT17xxxIx)

Power:

⦁ Power consumption: <1.2Wt
⦁ All models have redundant power inputs and 5V power output.

Only for Models with PoE

Redundant power inputs:
⦁ Power Input 9…30V
⦁ Isolated Power Input 37…55V (recommended48V)
⦁ Power Input 5V
⦁ PoE (Power over the Ethernet) isolated input, passive or IEEE 801.2af/at compatible

For Models without PoE

Redundant power inputs:
⦁ Two redundant power Inputs 9…30V
⦁ Power Input 5V

Analog inputs, Comparator, Counter and Relay

⦁ The AT17000 presents a virtual node on the Modbus/TCP and ModbusRTU networks with independent programmable ID and address.
⦁ ADC conversion results, Comparator state and Counter, Relay state and control also present themselves as Modbus registers on programmable address in the AT17000, accessible as a slave or server on the Modbus Network.
⦁ Models that include ADC (or ADC/Comparator/ Counter) and Relay at the same time, can be configured to use the ADC thresholds and conditions to turn the relay ON or OFF.

Analog and Comparator/Counter Inputs and Relay

 

⦁ Different models have 1 or 3 ADC inputs
⦁ Analog input 1 is combined with independent programmable comparator and counter inputs (for models with Comparator/Counter).
⦁ Input Impedance: 501 K
⦁ ADC Bits: 12
⦁ ADC Speed: Programmable 128 SPS to 1 kSPS
⦁ ADC Input Range: 0…+2.5V; 0…+5V; 0…+10V;
⦁ ADC 1 Input Current Range: 0…10mA
⦁ Comparator Programmable Voltage: 0…11.2V
⦁ ADC and Comparator Channels:
⦁ AT17x1xXX – 1 ADC input, 1 relay
⦁ AT17x2xXX – no ADC inputs, 2 relays
⦁ AT17x3xXX – 3 ADC inputs, no relay
⦁ AT17x4xXX ¬– 3 ADC inputs, or 2 ADC input & 1 counter input
⦁ AT17x5xXX ¬– 1 ADC/counter/comparator input, 1 relay
⦁ Relay outputs are isolated solid-state relays.
⦁ Max current: 1.0 A
⦁ Max voltage: 30 V

Dimensions (mm)

Modbus TCP Gateway

Serial another Serial Network (no txt)Master to Serial Slaves in

Modbus TCP Gateway
Scroll to Top